terra-S L-profile Basic

Boundary for natural and paving stone

The Basic L-profile is ideal for straightforward installation, for example as a border for paving and natural stone surfaces, as a path border and as a border for roof gardens and terraces. L-profile Basic is available in galvanised steel in the angles 90/60 mm, 130/70 mm and 210/75 mm, in stainless steel (chrome steel 1.4016) in the angle 210/75 mm, in Corten steel in the angle 90/60 mm and in aluminium in the angle 90/60mm and 100/50mm. The standard length is 240 cm. Inside and outside corners are also available.

Visible width

The visible width of the rounded top edge is 10 mm to protect against injury and prevent damage to the mower.

L-profile for straight installation

The Basic angle section is 240 cm long and has 3 trapezoidal contact areas. The 3 trapezoidal surfaces provide high stability, the profiles are only suitable for straight installation. The holes in the horizontal surfaces offer the possibility for additional fixing in the substructure, e.g. with earth nails or concrete anchors.

Wave profile

The wave profile gives the profiles a very high bending strength, which is about 8 times higher than that of the smooth material (see also TÜV Süd material report).

Angle profiles

• Angle profile Basic galvanised steel Angle 90/60 mm, 130/70 mm, 210/75 mm
• Angle profile Basic chrome steel (1.4016) Angle 210/75 mm
• Angle profile Basic Corten steel Angel 90/60 mm
• Angle profile Basic chrome-nickel steel angle 90/60 mm
• Angle profile Basic Aluminium (substrate rail) Angle 90/60 mm, 100/50 mm